Auto reset module for MLT-101 ,printer 2160 series

Hold the button PRINT SCREEN / WPS (above the power button) for about 10 seconds until the LED flashes once then leave. – Counters reset to 100% after each stop/ start the printer.

The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.

Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.

To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer`s network to a static/manual IP address. Finally, type in the new IP address.

Press and hold the (WPS) button on the control panel for about 2 – 4 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router).

The printer drops the network connection, resets its network settings to their factory defaults, and prints a Printer Configuration label and a Network Configuration label.