a BJ cartridge error on canon 2010 bjc

Canon FC 1

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover.

Any boiler showing the E1 fault code means that a significant pressure drop has occurred in the system. The fix is to repressurise your boiler. When your boiler is switched off, the pressure gauge should read around 1 Bar – in the green zone on the gauge.

This means there may have been a problem installing the update.

This issue is typically caused by a setting conflict on your router. Please complete the following to troubleshoot this issue: 1. Turn off the machine, wait 30 seconds, and turn the machine back on.

Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.

1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.

Fixing the 0x0000011b Printing Error on Windows

This error has largely affected Windows 10 computers. To fix the issue, try to install all the pending Windows updates that may include a hotfix. You can also add the printer manually to a local port or edit the registry entry to disable the problematic setting.

a misprint or misspelling in a text.

The E1 error code is an AUTO-STOP PROTECTION indicating a short or open circuit in the indoor pipe sensor. Try unplugging the unit and waiting 2 minutes for the power to discharge. Then plug the unit back in.

If your air conditioner displays E1 in the display panel and won`t turn on, it means that the Room Thermistor (a device connected to the thermostat that detects room temperature) is shorted or defective, and you need to have your air conditioner serviced.

Code 1 “This device is not configured correctly.

The device has no drivers installed on your computer, or the drivers are configured incorrectly. In the device`s Properties dialog box, click the Driver tab, and then click Update Driver to start the Hardware Update Wizard. Follow the instructions to update the driver.

A Whirlpool washer error code E1/F9 occurs when the washer`s control board detects that the washer cannot drain.

Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.

Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.

The shelf life for an original printer cartridge is 24 months and the shelf life for a compatible cartridge is 36 months. Over time, ink dries out and settles inside the cartridge, which can cause your printer to clog.

First, locate your print head. Next, dip a q-tip in a mixture of isopropyl alcohol and warm, not hot, water. Swab the q-tip along your print head and dislodge any dry pieces of ink that may be causing blockages. Once you`re satisfied that your print head is clean, allow it to dry overnight.

Select your printer then press “Manage” Select “Printing Preferences” Click on the “Maintenance” tab on the far right. From there you should be able to see ink levels for your selected printer.

Ink streaks, leaks or toner dust are telltale signs that a cartridge may be a counterfeit product.

When those lights are lit, that is an indication that the ink cartridges would need to be replaced.

E, 0, 8 E08 Ink absorber is almost full. The ink absorber collects excess ink after head cleaning or during printing. Ink usually goes into a bottle which eventually becomes full. There is a risk that ink can begin to spill.

Extremes of temperature and moisture can damage delicate printer parts, and dust can build up and cause problems with printing quality.

Causes of the 0x0000011b error code

The security patches Microsoft released to protect Windows 10 and 11 from Windows Print Spooler Spoofing caused vulnerability in remote code. And the involved patches are KB5005565 and KB5005568.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon BJC-70 error message F 12

ANSWER : I am having the same problem, not only with my BJC-70, but also the equivalent problem with my BJC-80. Typically I am working at my computer, and the printer is powered up, but idle. All of a sudden for no apparent reason, it emits a series of beeps and returns the print head to the central position. The BJC-70 display Error F12. With the BJC80 you have to count the beeps. The problem seems to be caused by some sort of premature failure of the print head, due to an electronic fault. Sometimes, if the printer is powered down for a few minutes or longer, it will work normally for a short time after power is re-applied, but typically the problem recurs within 30 minutes, and this period of trouble free operation gradually reduces, until the print head will not work at all. The only solution is to replace the offending print head. You should, however, retain the failed head, in order to salvage any un-used ink remaining in the tanks. The new print head comes with full ink tanks. As soon as one of these fails, I replace it with an ink tank retrieved from the failed head. I don’t discard the failed head until both ink tanks have been retrieved.

Read Full Q/A … :

Canon FC 1

Canon Pixma MP830 error 6500

ANSWER : I was never able to fix the Canon Pixma after receiving the error message. I tossed it and bought an Epson Artisan 837 for its capabilities. I am still using the Epson with no problems. I also bought an Epson Workforce 545 and am still using it too.

Read Full Q/A … :

Canon FC 1

Canon Pixma MX870, Error 6000 and Service Manual

ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon FC 1

canon MX700 6A80 error, head locked

ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.

Read Full Q/A … :

Canon FC 1

Canon iPF755 error 03130031-2F13

ANSWER : Hi, excuse me for the question…have you solved the problem with the plotter? I have the same and i don’t know what to do. Thank you

Read Full Q/A … :

Canon FC 1

CANON P200- ERROR 5100 PLEASE HELP!

ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon FC 1

Canon Pixma MP150 Error Code 5100

ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon FC 1

Printer Canon i560 Service Error?

ANSWER : 1 Turn off the printer.

Read Full Q/A … :

Canon FC 1