Epson DFX 8500

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ensure that the power cord is correctly plugged into the printer and the electrical outlet. If the power cord is damaged, replace it with a new one. Try to plug the printer into a different outlet to rule out any issues with the outlet. If the power cord and outlet are okay, the next step is to check the power button.
If the printer does not turn on after plugging the power cable into an outlet, it is most likely not receiving power. After each step below, check to see if the problem is resolved. Unplug the adapter cable from the wall adapter, then plug it back in. Unplug the adapter cable from the printer, then plug it back in.
If the Error LED is flashing: Check whether paper is jammed. If it is jammed, remove it (Printing stops if the thermal head overheats and resumes automatically when it cools). For other cases, turn the printer off, and after 10 seconds, turn it back on.
Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
Printer sleep mode

Check that the printer does not have sleep mode enabled: Go to Control Panel > Devices and Printers. Right-click the printer in question, then select Printer Preferences. Look for an option to disable sleep or time-out mode.

Select On to wake the printer from sleep mode by tapping the LCD touchscreen or by pressing a button on the control panel. Select Off to wake the printer from sleep mode by only pressing a button on the control panel. This prevents unintentional operations due to objects bumping the LCD touchscreen.
The blinking power light indicates that the unit has a cartridge problem. There could be several reasons for this: 1. Incorrect, defective or swapped cartridges.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
Start by checking your hardware

If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Select On to wake the printer from sleep mode by tapping the LCD touchscreen or by pressing a button on the control panel. Select Off to wake the printer from sleep mode by only pressing a button on the control panel. This prevents unintentional operations due to objects bumping the LCD touchscreen.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Weird Problem: Epson R2400 Printer won't power on
ANSWER : I just had exactly the same thing happen. The printer is usually on, but now is off and will not power on. Anybody know what is going on? Is there a fuse blown? Where would that fuse be?

Read Full Q/A … :

Epson DFX 8500

HP Officejet Pro 8500 Wireless with fake paper jam
ANSWER : HP Officejet is by far one of the frustrating piece of equipment I have ever owned. I bought it as unused in the package, at that point no warranty left. less than 6 months and 500 pages the white cog gear wheel broke. Luckily with instructions in this site I manage to glue it back together. Then I bought new ink – problems started as they were not original HP 30$ per cartridge. Ordered originals (here in China), took over one week to get them. Then found out that printhead needed to be replaced => more than 100$ spent. Still constant problems: If my wife kids print, I need to be stand-by as you never know what happens. Really an Office level equipment. After cleaning one paper jam I broke the encoder tape, took me another 4 hours to get it fixed. Then broke the cog gear again and got it displaced. Another 4 hours. Only reason I am not throwing this s***t out of window is that there are still ink left. Luckily this drinks them like a horse, for sure I will no more buy new ink. I will get a new laser instead, and not from HP. About cog wheel fixing: make sure that the white wheel is positioned correctly so that the small torx in shaft goes into the slit in the white wheel. When fitting the black cover back, make sure that the white washers on both sides fit into to slits of the black cover. Good luck.

Read Full Q/A … :

Epson DFX 8500

Power problem
ANSWER : Buy a new printer.

Read Full Q/A … :

Epson DFX 8500

HP Officejet Pro 8500 Carriage Replacement steps
ANSWER : Hi Mark:

Read Full Q/A … :

Epson DFX 8500

Lexmark T654dn power supply problem
ANSWER : Maybe this Thread may be of use:

Read Full Q/A … :

Epson DFX 8500

LaserJet 4 won't Power Up
ANSWER : I haven’t seen that particular behavior on that model. It either works or it doesn’t. My first choice would be the power supply.

Read Full Q/A … :

Epson DFX 8500

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

Epson DFX 8500

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :

Epson DFX 8500