Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Low or empty cartridges can also cause the printer to print blank pages. So, check the ink/toner levels on your printer and replace cartridges if necessary.
Select [Printer Properties] from the list. Select the [Advanced] Tab at the top of the Printer Properties Screen (may have a PS or PCL in from it depending on Driver installed). Locate the [Printer Separator Page] button on the lower left of the screen and select it.
The optical sensor reads the unique media `signature` of the paper by measuring inherent optical properties and comparing them with the signatures of other papers. Once the paper is identified, the printer optimizes printing for the particular paper type.
Normally, the paper out error indicates that you are at the end of a roll of label stock. You will need to load another roll of media in the printer.
The message “No Paper” will appear on the LCD display if the Brother machine does not detect paper in the paper tray(Tray#1 or Tray#2) or MP(Multi-purpose) Tray. Resetting the Brother machine may resolve this issue.
Paper may be jammed if the rear cover is not closed completely. Push the rear cover until it is closed completely. If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the service center.
Paper may be jammed if the rear cover is not closed completely. Push the rear cover until it is closed completely. If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the service center.
If the paper guides are too tight, the paper might be held in the tray and not allowed to feed into the product. Try the print job again.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.

Read Full Q/A … :
Unknown Printer

Black Marks on top/bottom of page
ANSWER : Heres the example again

Read Full Q/A … :
Unknown Printer

printing blank pages
ANSWER : You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.

Read Full Q/A … :
Unknown Printer

Blank page with strips
ANSWER : That would be a bad wiper blade in the drum unit. Either the black or color drums. Whatever color or black the stripes are.

Read Full Q/A … :
Unknown Printer

test page
ANSWER : wow, you actually put your model in. Then you come up with “test page” and we’re supposed to know what the heck you are talking about.

Read Full Q/A … :
Unknown Printer

Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.

Read Full Q/A … :
Unknown Printer

incomplete printing of page
ANSWER : the printer for above mentioned problem is an Epson; product name = WF-254

Read Full Q/A … :
Unknown Printer

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :
Unknown Printer