How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Open the Wireless Settings menu on your HP Printer. Go to the bottom and tap the HP Wireless Direct option. Activate the Wireless feature on the computer you use to connect. Click the desired Wi-Fi Direct network on the list of networks displayed on the computer`s screen.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
I can log into the Printer`s console locally via the default IP : 192.168. 1.250.
HP inkjet and ink tank printers without a touchscreen
Use the Cancel and Wireless buttons to restore Wi-Fi setup mode. Press the Cancel button to ready the printer. Press and hold the Wireless button and Cancel button simultaneously until the Power button blinks.
Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.
Place the printer near the Wi-Fi router. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard. Select the name of your network, and then enter the password to complete the connection.
Resetting the NVRAM will reset all printer values including network, printer setup, job defaults, margin and paper calibrations to factory defaults. Note: It is recommended to print a configuration page prior to resetting the NVRAM.
From the desktop, double-click the icon for your HP printer. Click Maintain Your Printer, and then click Clean Printheads. Wait while the printer cleans the printhead, click OK, and then click Print Quality Diagnostics Page to see if the issue is resolved.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
PROBLEM: HP OfficeJet 7110 Series
I Have a HP office jet 7110 and doesn’t print at all, suddenly my printer not working well .when i am print out some documents yellow,black, and dark green color only coming . how can i fix it problem ?
door closed switch broken
Not familiar with how the inside of the door looks but you might be able to tear a piece of paper & bend it to fit in the sensor & tape it down. There is a piece of plastic that normally would be on the inside of the door & blocks the light sensor when the door closes. Sounds like that piece got broken but I’d imagine you can just block it with paper or thin cardboard & tape it in place to prevent it from falling loose.