HP LaserJet 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

yz Fuser error To continue turn off then on is displayed on the control panel, it indicates that there is an issue with the fuser. The XX and YZ are two digit codes that provide information on the specific issue causing the error. Press the power button to turn the printer off, and then back on to clear the error.
50.2 error indicates that the printer is not heating up fast enough. This can be caused by a bad heating element in the fuser but can also be caused when the printer does not have adequate power due to overloaded circuits or being plugged into a power strip or surge bar that limits current flow.
Error 50.8 suggests one end of the fuser is not heating up which may be damage to the sleeve or heavy media. The fuser may not be to blame.
50.AF is a low fuser temperature error and usually caused by a defective fuser. Resetting the printer is unlikely to resolve this error.
Error 50 is Invalid destination number.
Error code 50 indicates your Mac could not copy or move files from external storage devices. The whole process gets stuck with no visible progress.
50 error is a fuser error and means the fuser needs to be replaced. Do a search for the part on google and then see if it is worth repairing based on cost of the fuser and if you will need to hire someone to replace it for you.
If you see this error code 50.5 on an HP LaserJet 4200, 4240, 4250, 4300, or 4350 series printer, the fuser installed in the printer is registering as an incorrect fuser for that model printer.
If you are seeing a “50.1 Fuser Error” on your HP LaserJet 5000 or 5100 series printer, you probably need to replace the fuser. Fusers are a consumable part and are sold as part of a maintenance kit; it is expected over the life of the printer you will replace the fuser several times.
Look inside the fuser opening to make sure there is no debris or jammed paper. Remove any debris or jammed paper, if found. Hold the handles on each side of the fuser and reinstall it in the printer.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
Re: Sky Go app on iPad error 50-2 code

Are you at home and connected to your Wifi connection when this error appears, if so try disabling the Wifi on your device and then enable it again after a few minutes. If someone has helped you then please click on the LIKES button in their post.

Code 50 = Memory initialization error.
Sub-Zero Error Code EC50

Meaning: Excessive Refrigerator Compressor Run – This basically means that your refrigerator runs constantly or too much.

This issue comes if the user specified in the LDAP connector is not having sufficient privileges to write to the particular object. 1) For Solution, enter CR with a Workaround if a direct Solution is not available. 2) For HOW TO, enter the procedure in steps. 3) For FAQ, keep your answer crisp with examples.
If you are experiencing a “50.7” fuser error, first turn the printer off and back on. Sometimes the error will temporarily go away with a reboot so you can print a few more pages, but usually the error reappears.
I found the following: Error 50 means that the heating of the fuser unit is no longer working. This is usually a burnt-out heating lamp,or a defective thermal fuse.
If you see this error code 50.5 on an HP LaserJet 4200, 4240, 4250, 4300, or 4350 series printer, the fuser installed in the printer is registering as an incorrect fuser for that model printer.
Turn off the HP printer and unplug it from the power source. Also, shut down your computer and unplug any external devices. Wait for a few minutes and then plug in the printer and turn it back on. Finally, turn on your computer and check if the error state has been resolved.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
Turn off the HP printer and unplug it from the power source. Also, shut down your computer and unplug any external devices. Wait for a few minutes and then plug in the printer and turn it back on. Finally, turn on your computer and check if the error state has been resolved.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :

HP LaserJet 2

error 50
ANSWER : Most likely the quartz lamp in the fuser assy. burned out. you can remove it and check the resistance on the 2 large pins in the connector. Should be several ohms.

Read Full Q/A … :

HP LaserJet 2

Epson service utility program
ANSWER : Hi Have you a service utility for a Epson XP55 my ink overflow is stopping me from carrying on Im computer is a mac 10.7.5 Regards Andypandy

Read Full Q/A … :

HP LaserJet 2

SERVICE REQUIRE
ANSWER : I think you have to repair your printer by the company, I think you can’t do anything because it is manufacturer problemor take some advice from online assignment writing helper may they can solve your problem they have skilled and professional employees.

Read Full Q/A … :

HP LaserJet 2

Service Manual needed to check PS Voltages
ANSWER : I really doubt you can find a service manual for it, if they even exist.

Read Full Q/A … :

HP LaserJet 2

What repair needs to be done for a "50 needs repair" message on an HP Laserjet IIIP?
ANSWER : I don’t know what you mean by good toner cartridges. They haven’t been built in about 10 years, so if they are new OEMs in the box, they are guaranteed to fail. The 50 error on that printer is mostly a burned out fuser lamp. This site was sold, so as you can see, there are no more kits available.

Read Full Q/A … :

HP LaserJet 2

can i override the error code 50
ANSWER : First off, your printer is an inkjet printer. It has no drum. The error refers to a paper jam.

Read Full Q/A … :

HP LaserJet 2

Who Provides Best printer support services
ANSWER : Do they all speak English as good as you do? Wow, looked at the website. You would like think that you could find someone who spoke English as their first language to write it. It reads like a bad Google translate.

Read Full Q/A … :

HP LaserJet 2