Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

In general, a 49 service error is a situation where the printer cannot process a file that has been sent. In some cases the file is corrupted and in other cases the printer`s firmware simply cannot interpret that file.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
The Policy Server reports Error 49 when the user credentials are invalid. With Active Directory as the user store, error 49 may appear for multiple reasons. In the Policy Server log, error 49 is followed by a data code, and this data code gives the exact reason of unsuccessful authentication.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
To override HP ink cartridge error, remove and reinstall the indicated cartridge 2-3 times until it firmly seats in the slot. Then turn off the printer and remove all cartridges. Gently, with a dry lint-free cloth, wipe the contacts on the cartridge and carriage to remove any dirt or residue.
Error 49 is one of the “firmware error traps” for the formatter. It is most likely triggered by a sequence of events that the printer firmware doesn`t cater for any other way.
A “49. DE. 05 Webkit encountered a fatal error, unable to recover`” error message displays on the control panel of an HP LaserJet Enterprise or an HP PageWide Enterprise printer with an installed software solution, causing the printer to automatically restart or prompts for a restart.
You`ll know fairly quickly if your printhead is causing you problems. If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
Turn the printer off. Disconnect the power cable from the printer for 30 seconds and then reconnect. Turn the printer on while you press and hold the Resume button for 10-20 seconds.
Some random crash 49.38. 13 may happen when the BarDIMM Pro is installed in the printer equipped with that firmware and other solutions. The defect is fixed in HP Futuresmart 5.2 firmware. If your HP printer does not have Futuresmart 5.2 available, we recommend you downgrade to Futuresmart 4.11.
This error can be caused by having insufficient memory on the device. e.g. multiple apps are installed on the MFP at the same time. Note 💡 It is recommended for the PaperCut partner to do the steps below, as opposed to the end customer, as the MFP will need to be reconfigured with PaperCut Hive and PaperCut MF.
This error might happen at any time for multiple reasons. The most common causes are due to the printer being asked to perform an action that the firmware is not capable of, and might not have been designed to perform, such as: Printing files with unsupported programming commands.
A “49. DE. 05 Webkit encountered a fatal error, unable to recover`” error message displays on the control panel of an HP LaserJet Enterprise or an HP PageWide Enterprise printer with an installed software solution, causing the printer to automatically restart or prompts for a restart.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645

Read Full Q/A … :
Unknown Printer

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :
Unknown Printer

52.0 SCANNER ERROR
ANSWER : Laser scanner assembly.

Read Full Q/A … :
Unknown Printer