HP LaserJet 4200
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Turn the printer on, and replace the cartridges if possible. If the carriage moves, but there is still a grinding noise, there may be a paper feed issue. If the carriage will not move, then it is a carriage stall issue.
This noise can be due to any one of the following: A piece of paper, or other obstruction, is stuck somewhere inside the printer. One of the toner cartridges or photo developer units may be installed incorrectly or may be damaged. A door or cover may not be closed completely.
LaserJet 4200
They were introduced in December 2002 together with the HP LaserJet 4300 series.
A grinding sound is heard when the printer is turned on or when it is printing. Blinking lights may accompany the noise. The problem can be caused by a carriage stall or a paper jam.
When the bushing wear thin, the pressure roller gear rides too low and you`ll hear gear noise because the gears are grinding against each other and not meshing well. To fix this problem, you should replace the fuser and also the fuser drive gear in the printer.
A clicking sound may occur if the stirring spring assembly inside the Toner Cartridge catches on a rib within the cartridge, preventing the stirring spring and its gear from turning. The resulting click is caused by the drum`s toner drive gear slipping against the stirring spring gear on the Toner Cartridge.
As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.
(formerly an acronym for Hewlett-Packard) is an American multinational information technology company headquartered in Palo Alto, California, that develops personal computers (PCs), printers and related supplies, as well as 3D printing solutions.
Laser printers can print much faster than inkjet printers can. Most are equipped with high-capacity paper trays, so they can print more pages at a given time. They`re also built to handle the printing of thousands of pages per month without succumbing to wear-and-tear.
Answer. On HP printers, a “cold reset” causes the printer to return to its factory default settings, which among other things, causes it to try and retrieve its configuration information from a BOOTP server.
How to do a hard reset on your printer. With the cartridges still installed, power down the printer and then unplug the power cord from the wall. Wait for a minute, then plug the printer back in and power it back up. Wait for the cartridges to center and then try printing again.
Paper pushed too far into the input tray when it is loaded, might feed into the printer incorrectly, causing the paper to tear. Paper stacks loaded into the input tray with too many or too few sheets of paper, might feed into the printer incorrectly, causing the paper to tear.
Paper pushed too far into the input tray when it is loaded, might feed into the printer incorrectly, causing the paper to tear. Paper stacks loaded into the input tray with too many or too few sheets of paper, might feed into the printer incorrectly, causing the paper to tear.
Paper pushed too far into the input tray when it is loaded, might feed into the printer incorrectly, causing the paper to tear. Paper stacks loaded into the input tray with too many or too few sheets of paper, might feed into the printer incorrectly, causing the paper to tear.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Optional 250 Sheet Feeder Tray (Q5931A – Tray 3) Constantly "Jams"
ANSWER : You don’t say if the paper moves at all. That’s key in determining the cause. If it’s not moving, then try swapping the rollers with tray 2. If it is moving out of the tray, then that would indicate there is some obstruction it is hitting on its way out of the tray. Hard to troubleshoot remotely when one doesn’t have specific details since we can’t see what is occurring.
Read Full Q/A … :
HP LaserJet 4200
Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.
Read Full Q/A … :
HP LaserJet 4200
laserjet 4200 4250 4300 4350
ANSWER : I just (by mistake) bought the tone 381 for 4200 by mistake on eBay. I just cut off the extra plastic noses and it does work now with my 4250! I’m really glad about that ;D
Read Full Q/A … :
HP LaserJet 4200
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
Read Full Q/A … :
HP LaserJet 4200
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP LaserJet 4200
HP 4000 Dupler Grinding Noise
ANSWER : More Information
Read Full Q/A … :
HP LaserJet 4200
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Read Full Q/A … :
HP LaserJet 4200
Paper tray 3
ANSWER : What usually happens in this instance is that the access flap to the left of the pickup roller pops up. This blocks the tray from opening. The only way to fix it is to look in from the back of the tray with a flashlight and get something thin and long, maybe a wooden ruler? Reach in and push down on the flap until it locks in place. If you’re not sure what I’m referring to, you can pull out and look at tray 2 for guidance.
Read Full Q/A … :
HP LaserJet 4200