Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

HP Smart app might display the “Printer status unknown” error message if your printer is idle or offline. If your printer goes into sleep or standby mode after a period of inactivity, press the power button to “wake” it.
Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.
Press and release the Power button to start a Power On/Off cycle. Do not hold the button down. Note: If you press and hold the Power button too long, the printer might turn on and then off without restarting.
Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
Instead of adding the printer to the existing network, you may attempt to print via Wi-Fi Direct. In case this does not work as well and you refuse to use HP Smart, it`s on you to bring the right drivers and install them manually.
Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer`s system.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
In Windows, search for and open Add a printer or scanner . Click Add a printer or scanner, and then wait for Windows to locate available printers. If your printer is found, click it, and then click Add device to complete the driver installation.
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
If you are using a network printer that is wireless or wired and you experience a network disruption such as a power outage then you should reset your switch or wireless router by unplugging it and then plugging it back in.
The five common power supply problems include voltage and current issues at the input and output, reversed polarity, temperature issues, and missing external components.
Definition of unknown. as in unfamiliar. happening or existing without one`s knowledge unknown to me was the fact that while I was out, my family was hurriedly preparing a surprise birthday party. unfamiliar. unbeknown.
Synonyms of unknown (adj. obscure, mysterious) anonymous.
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Print a Wireless Test Report

The Wireless Test Report provides information about the printer status, hardware (MAC) address, and the IP address. If the printer is connected to a network, the test report displays details about the network settings.

An HP Smart account allows you to print and scan from the HP Smart app, as well as access to premium features such as mobile fax. You can also use HP Smart to remotely manage, share access, and print from anywhere with a compatible HP printer.
if your PC do not offer wireless connectivity a USB cable would be required unless your router supports WPS. If your PC is wirelessly connected to the router, restore the pritner settings as following: Click the WiFi button on the printer and select Restore Network Settings, confirm and prompt.
Printer sleep mode

Check that the printer does not have sleep mode enabled: Go to Control Panel > Devices and Printers. Right-click the printer in question, then select Printer Preferences. Look for an option to disable sleep or time-out mode.

If the cord is not damaged, plug it back in after at least five minutes. If you are still unable to obtain power to the device, try another power outlet. If possible, try connecting power directly to a wall outlet (as opposed to using a surge protector or power strip…just as a troubleshooting measure).
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
Ensure that the power cord is correctly plugged into the printer and the electrical outlet. If the power cord is damaged, replace it with a new one. Try to plug the printer into a different outlet to rule out any issues with the outlet. If the power cord and outlet are okay, the next step is to check the power button.
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
Ensure that the power cord is correctly plugged into the printer and the electrical outlet. If the power cord is damaged, replace it with a new one. Try to plug the printer into a different outlet to rule out any issues with the outlet. If the power cord and outlet are okay, the next step is to check the power button.
Ensure that the power cord is correctly plugged into the printer and the electrical outlet. If the power cord is damaged, replace it with a new one. Try to plug the printer into a different outlet to rule out any issues with the outlet. If the power cord and outlet are okay, the next step is to check the power button.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Lexmark T654dn power supply problem
ANSWER : Maybe this Thread may be of use:

Read Full Q/A … :
Unknown Printer

HP DeskJet 1220C Prints only Pink & Black
ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?

Read Full Q/A … :
Unknown Printer

HP 1220C Photo Paper Feed Problems
ANSWER : This problem isn’t about the paper picker. Here is the real issue and fix:

Read Full Q/A … :
Unknown Printer

Wont power on
ANSWER : If it is plugged into a power strip or surge protector unplug it and plug directly into wall outlet; check to make sure the power cord is fully seated where it connects to printer.

Read Full Q/A … :
Unknown Printer

Printer does not print after power off
ANSWER : Hello .. I have a problem with my HP1102w printer.. It had worked fine for a while.. But now it will not print after it shuts down.. I have reset it to factory setting,, and removed the drivers/software from my computer and reinstalled several times using the wireless install.. but everytime it will work just fine wirelessly and with the USB cord untill either I turn it off and back on or it shuts down by its self… When you try to print after it is turned back on it will not do anything.. it used to turn its self back on when I would print wirelessly but now it will not.. the blue wireless light is on lik eit is connected to the network router.. Doe anyone have any ideas.. I am using XP-pro… VMware Training in Chennai | VMware Training in Chennai | VMware Training in Chennai

Read Full Q/A … :
Unknown Printer

Power button HP Destjet 1000
ANSWER : I have never seen a power button go bad, not that it couldn’t happen. Possible your power supply isn’t working or a board in the printer went bad.

Read Full Q/A … :
Unknown Printer

Power problem
ANSWER : Buy a new printer.

Read Full Q/A … :
Unknown Printer

HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on

Read Full Q/A … :
Unknown Printer