HP Color Inkjet 2000C

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
The Power button is blinking. This condition might be caused by an open ink cartridge access door, an empty input tray, a paper jam, or a carriage jam. An error message might display on your computer. If a `paper jam` error message displays on your computer, try the steps to clear the paper jam.
An E1 or E2 error indicates that the paper size setting does not match the paper size that is loaded.
This error code can appear for a few reason such as cable issues, firmware errors or hardware faults. You can try the reset processes as stated at the top of the page, then if the error code still displays update the firmware, also try using different printer cables.
To cancel or delete stuck print jobs, open the Services application and stop the “Print Spooler” service. Navigate to %windir%\System32\spool\PRINTERS, delete all the temporary files there, and then start the Print Spooler service again.
Troubleshoot a blinking orange light on HP DeskJet.

It indicates firmware issues, paper jams, or improperly installed cartridges. Resolve it by performing a power reset of your printer. Take out the installed cartridges.

The HP Printer Error Code 11 means Paper Out. When your HP printer isn`t out of paper, this probably means there`s a problem with the paper tray or paper sensor. The hp printer Error code 12 manner open or no ep. While your hp printer does have toner cartridges mounted efficient.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed. SUBSCRIBE RSS FEEDS.
If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
To clear the error state, reset the printer, connecting the power cord directly to a wall outlet to make sure the power source is stable and prevent more carriage jams. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source. Wait 60 seconds.
Remove any jammed paper that is accessible from the input tray area. Press the Cancel button to try and automatically clear the paper jam. If the paper jam error persists, continue these steps to manually clear the jam. Gently remove any jammed paper and bits of torn paper from the input tray.
To clear the error state, reset the printer, connecting the power cord directly to a wall outlet to make sure the power source is stable and prevent more carriage jams. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source. Wait 60 seconds.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

HP Color Inkjet 2000C

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :

HP Color Inkjet 2000C

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :

HP Color Inkjet 2000C

Error code sc27-04
ANSWER : Sorry the code is sc27-04

Read Full Q/A … :

HP Color Inkjet 2000C

Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048

Read Full Q/A … :

HP Color Inkjet 2000C

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

HP Color Inkjet 2000C

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

HP Color Inkjet 2000C

printer error code unable to print 4f
ANSWER : Follow these instructions:

Read Full Q/A … :

HP Color Inkjet 2000C